Textile machinery presents an unusual paradox: the lubricant must be everywhere — spindles running at extreme RPM, needles cycling millions of times a day, humid air systems — yet it must never touch the product. A single stain from fling-off or a leaking fitting can downgrade an entire lot of fabric. At the same time, lint and fibre fly infiltrate every mechanism, and humidity in spinning halls attacks unprotected steel.
Banesto's textile range — including our dedicated knitting series — is engineered around non-staining, scourable chemistry that protects the machine without ever costing you the cloth.
Lubrication Challenges in Textile Mills
Staining Risk
Lubricants near yarn and fabric paths must be non-staining and scourable — washed out completely in processing.
Very High Spindle Speeds
Ring frames and rotors run at speeds where only precisely selected low-viscosity oils control temperature and wear.
Lint & Fibre Contamination
Fibre fly packs into bearings and slides — lubricants must resist gumming and carry contaminants away from contact zones.
Humid Atmosphere
Controlled humidity in spinning halls promotes corrosion on slides and needle beds without protective film-formers.
Recommended Banesto Products
Selected from our 852+ SKU range for the duty cycles most common in textile Mills. Every recommendation is matched by application — temperature envelope, load class, speed factor, and exposure environment — not by catalogue number.
Slideway Oil (ISO 68)
TACKIFIED · STICK-SLIP FREE
For loom and machine slideways — adhesive film eliminates stick-slip for precise motion, resists washdown and lint gumming.
View Product →Polyurea Long-Life Bearing Grease
HIGH SPEED · LONG LIFE
For motor and spindle bearings — polyurea thickener excels at high speeds and temperatures with sealed-for-life service intervals.
View Product →PTFE Dry-Film Lubricant
DRY · NON-STAINING
Where wet lubricant is unacceptable near fabric paths — dry PTFE film lubricates guides, cams and needle areas with zero stain risk.
View Product →Compressor Oil (ISO 100)
LOW CARRY-OVER · STABLE
For the compressed-air systems behind air-jet looms and pneumatics — minimal oil carry-over protects downstream air quality.
View Product →Lithium Complex MP Grease (NLGI 2)
MULTI-PURPOSE · WATER RESISTANT
General plant grease for humid spinning-hall conditions — corrosion protection for the balance of plant.
View Product →Chain & Wire Rope Lubricant
PENETRATING · CLEAN FILM
For stenter chains and drives running through heat zones — penetrates pins, leaves a clean high-film-strength lubricant.
View Product →
Spinning, weaving, knitting or processing — tell us your machinery makes and stain-sensitivity requirements, and our team will build a plant-wide lubrication schedule.
Talk to Our Technical Team →