In food and beverage processing, lubrication is a food-safety decision before it is a maintenance decision. Any lubricant used where incidental contact with product is possible must be NSF H1 registered — and auditors will ask for the paperwork. Yet the machines themselves are unforgiving: retort and oven chains run hot, bottling lines are hosed down with caustic cleaners daily, and freezers demand grease that still pumps at deep sub-zero temperatures.
Banesto's food-grade range is formulated to hold H1 compliance and mechanical performance at the same time, with documentation that stands up to FSSC 22000 and BRCGS audits.
Lubrication Challenges in Food & Beverage Plants
Incidental Contact Compliance
Every lube point above or beside open product must use NSF H1 registered lubricant — with registration documents on file for audits.
Daily Caustic Washdown
High-pressure hot water and CIP chemicals strip ordinary greases within days — H1 thickeners must resist washout.
Temperature Extremes
The same plant runs blast freezers and baking ovens — lubricants must be matched to each temperature envelope.
Steam & Moisture
Cookers, retorts and bottle washers saturate bearings with moisture, demanding exceptional corrosion protection.
Recommended Banesto Products
Selected from our 852+ SKU range for the duty cycles most common in food & Beverage Plants. Every recommendation is matched by application — temperature envelope, load class, speed factor, and exposure environment — not by catalogue number.
Food-Grade White Grease (NSF H1)
NSF H1 · WASHOUT RESISTANT
The line-side standard: H1-registered grease for bearings, slides and pins across filling, packing and conveying equipment.
View Product →PTFE Dry-Film Lubricant
DRY FILM · CLEAN RELEASE
For guide rails, chutes and points where wet lubricant would attract product dust — clean, dry lubrication with release properties.
View Product →Biodegradable Eco-Lubricant
ENVIRONMENTALLY ACCEPTABLE
For total-loss points and environmentally sensitive areas around the plant — readily biodegradable chemistry.
View Product →Compressor Oil (ISO 100)
LOW CARRY-OVER · STABLE
For plant air feeding filling and packaging lines — high stability and low carry-over protect downstream air purity.
View Product →Chain & Wire Rope Lubricant
PENETRATING · HIGH FILM STRENGTH
For oven, proofer and conveyor chains — penetrates pins and bushes, resists carbonising at elevated temperatures.
View Product →Full Food-Grade Series
GREASES · OILS · SPRAYS
Our complete NSF H1 portfolio — greases, hydraulic oils, gear oils and chain oils — is listed in the datasheet library. Ask for the H1 registration pack.
View in Catalogue →
Preparing for a food-safety audit or converting a line to H1 lubrication? Our team will survey your lube points, prescribe H1 grades and hand you the compliance documentation.
Talk to Our Technical Team →